Clamps for Modular Welding Tables
Available6 products
Modular welding table clamps fit into holes on the surface of the table to hold workpieces in place. Clamps lock from the top of the table, which speeds set up over clamps that need to be secured from below the table. Clamps can also be used with riser blocks and other fixturing components.
T-Handle Clamps
T-handle clamps for modular welding tables have a screw mechanism that is tightened onto the workpiece. The main bar allows the clamp to be quickly adjusted to the workpiece while the screw mechanism tightens the workpiece in place. The handle slides to either end, which enables the clamps to be used in tight spaces and allows the welder to apply high torque to the clamp when securing the workpiece to the table.
| Loading... | |||||
Ratchet Handle Clamps
The ratchet handle on these clamps quickly tightens the workpiece. The ratchet mechanism resists loosening caused by vibration and torsion. The ratchet is parallel to the clamping bar, making it a good choice for working in tight spaces. The clamp slides along the main bar to quickly adjust the clamp to the workpiece.
| Loading... | |||||
Locking Clamps
Locking clamps can be set at any opening dimension to quickly lock parts in place when performing production work. Sometimes called insterta pliers, these clamps have a crank handle that tightens the clamp to the desired pressure.
| Loading... | |||||