Vehicle Cogged V-Belts
Available401 products
Vehicle cogged V-belts are single belts that mount to pulleys to transmit power from the engine to accessory systems in the vehicle. They have grooves across the width of the belt to help dissipate heat as it runs against the pulley. The fit of the belt's V-shaped profile in the groove of the pulley and the proper belt tension are key to a drive system's performance. These automotive V-belts are categorized by their top width.
08A Series Cogged V-Belts
08A series cogged V-belts have a nominal top width of 11/32" and a 36° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
11A Series Cogged V-Belts
11A series cogged V-belts have a nominal top width of 7/16" and a 36° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
| Loading... | |||||||
13A Series Cogged V-Belts
13A series cogged V-belts have a nominal top width of 17/32" and a 36° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
| Loading... | |||||||
| Loading... | |||||||
15A Series Cogged V-Belts
15A series cogged V-belts have a nominal top width of 11/16" and a 38° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
16A Series Cogged V-Belts
16A series cogged V-belts have a nominal top width of 11/16" and a 32° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
17A Series Cogged V-Belts
17A series cogged V-belts have a nominal top width of 3/4" and a 38° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
22A Series Cogged V-Belts
22A series cogged V-belts have a nominal top width of 15/16" and a 40° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
23A Series Cogged V-Belts
23A series cogged V-belts have a nominal top width of 1-1/16" and a 40° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
20A Series Cogged V-Belts
20A series cogged V-belts have a nominal top width of 7/8" and a 38° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
HC50 Series Cogged V-Belts
HC50 series cogged V-belts have a nominal top width of 1/2" and a 38° angle where the wedge of the belt meets the sides of the grooves in the pulley (actual dimensions may vary slightly).
| Loading... | |||||||
HPX Series Cogged V-Belts
HPX series cogged V-belts are designed for all-terrain vehicles (ATVs) that traverse muddy roads, rocky trails, and sandy desert hills.
| Loading... | |||||||
XTX Series Cogged V-Belts
XTX series cogged V-belts are cogged on both the top and bottom of the belt and are designed for snowmobiles that traverse snow-covered terrain.
| Loading... | |||||||