Lighting Photocells

Available79 products
Lighting photocells switch a device on or off in response to changes in sunlight, typically turning a light on in response to the sun setting and switching the light off when the sun rises. These photocells are used in many outdoor lighting applications, like walkways, parking lots, and recreational areas in parks, schools, commercial, and industrial settings.

Fixed Stem-Mounted Photocells

Fixed Stem-Mounted Photocells
Fixed stem-mounted photocells consist of a threaded base that attaches to a conduit to feed wire leads through to lighting elements. The photocell's base is immobile and the photosensor cannot be repositioned once it is installed.

Non-Metallic Enclosure

Loading...

Translucent Non-Metallic Enclosure

Loading...

Aluminum Enclosure

Loading...

Cast Zinc Enclosure

Loading...

Adjustable Stem-Mounted Photocells with Swivel Arms

Adjustable Stem-Mounted Photocells with Swivel Arms
Stem-mounted photocells are adjustable after installation to manually position photosensors at an optimal angle to catch direct sunlight.

Side Sensor Lens Location

Non-Metallic Enclosure

Loading...

Translucent Non-Metallic Enclosure

Loading...

Top Sensor Lens Location

Non-Metallic Enclosure

Loading...

Flush-Mounted Photocells

Flush-Mounted Photocells
Flush-mounted photocells allow the bulk of their housing to be enclosed inside a wall or within the device it's controlling. This mounting style protects the components and is more visually appealing compared to stem-mounted or turn-locking photocells.

Flush In-Post

Loading...

Flush In-Wall

Loading...

Turn-Locking Photocells

Turn-Locking Photocells
Turn-locking photocells twist and lock directly into a receptacle installed on the lighting device. Their design eases replacement when swapping out old or broken photocells.

SPST Contact Form

Loading...

SPDT Contact Form

Loading...

Receptacles for Turn-Locking Photocells

Receptacles for Turn-Locking Photocells
These receptacles mount and connect to a lighting device and house a compatible turn-locking photocell. When a photocell fails, these receptacles remain installed and accept a replacement photocell.
Loading...

Shorting Caps & Plugs for Turn-Locking Photocells

Shorting Caps & Plugs for Turn-Locking Photocells

Shorting caps and plugs for turn-locking photocells block the ability of the sensing element to control the lighting device. These devices are used to manually switch lighting on and off during maintenance or if personnel plan to work after-hours temporarily.

Shorting Cap

Loading...

Shorting Plug

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top