These welding cable lugs crimp or solder to the end of the welding cable. The lug slides over the cable and then placed in a crimper or soldered to create a strong connection.

These ball-point welding cable lugs have a set screw that secures the lug to the cable. Ball-point lugs use a 1/4" hex wrench and don't require access to crimpers, soldering tools, or hammers.

These ball-point welding cable lugs have an insulated barrel to keep strands secure, prevent short circuits, and protect against corrosion that can cause connection deterioration. They have a set screw that secures the lug to the cable. Ball-point lugs use a 1/4" hex wrench and don't require access to crimpers, soldering tools, or hammers.

These welding cable lugs slide over the end of the cable and attach by hitting the lug sleeve with a hammer. Hammer-on lugs don't require use of crimpers or soldering tools.

Tweco-style welding cable connector terminals connect to a male Tweco-style connector. The connector can be left on the welder stud and the cable connected when needed. The cable can then be used on other equipment.