Silica Dust Extractor Attachments
Available3 products
Extractor attachments pair with hammering and drilling power tools and create a vacuum at the tool bit to capture silica dust. They are used with tools that chisel or drill concrete, masonry, rock, and other materials containing silica. Proper use of these attachments decreases the amount of airborne silica dust, reducing respiratory hazards and preventing accumulation on floors, surfaces, and tools.
Mounting Location
On-Surface Vacuum Attachments
On-surface vacuum attachments stick to a wall or floor and create a dust suction ring to drill within. They connect to an extractor hose, hold in place with the hose's suction, and form a barrier around drill bit tips to vacuum silica dust into the hose. They can be used with an OSHA Table 1 compliant extractor to mitigate silica dust to an acceptable level as set by OSHA’s Respirable Crystalline Silica Standard 1926.1153.
OSHA Table 1 Compliant: Unspecified
| Loading... | ||||||
Part of OSHA Table 1 Compliant Solution
| Loading... | ||||||