Corded Universal Silica Dust Extractors
Available14 products
Corded extractors vacuum up silica dust, reducing respiratory hazards from airborne dust and preventing accumulation on floors, surfaces, and tools. Their universal hose connector attaches to the vacuum port on a compatible power tool, extractor attachment, or dust shroud. They draw in dust produced by cutting, drilling, grinding, or surfacing concrete, masonry, rock, and other materials containing silica. They capture fine particles in their filters and collect dust in their onboard tank. These corded extractors allow long run times for repetitive tasks, maintain full power during operation, and have no batteries to recharge.
Corded Dust Extractors with HEPA Filtration
HEPA filters in these extractors capture finer silica dust than non-HEPA filters. They filter 99.97% of particles as small as 0.3 microns. Models that are OSHA Table 1 compliant pair with a compatible tool and extractor attachment to mitigate silica dust to an acceptable level as set by OSHA’s Respirable Crystalline Silica Standard 1926.1153.
Dry Pickup
| Loading... | |||||
Dry/Wet Pickup
| Loading... | |||||
Corded Dust Extractors without HEPA Filtration
Non-HEPA filters in these extractors are more cost-effective but can't filter particles as fine as HEPA filters do. They are commonly used for jobs that don't require compliance with OSHA Table 1.
Dry/Wet Pickup
| Loading... | |||||
Corded Slurry Vacuums without HEPA Filtration
Slurry vacuums suction up the mix of water and dust generated by wet concrete cutting, drilling, and grinding. Slurries are too heavy for standard dust extractors or wet/dry vacuums to pick up. These vacuums keep slurry from clogging drains and entering sewage systems. They are commonly used for jobs that don't require compliance with OSHA Table 1.
Wet Pickup
| Loading... | ||||||