Transitional pads remove scratches and imperfections to apply a pre-polish finish. They are used slightly wet to transition from metal- to resin-bonded abrasives.

Polishing pads are fine-grit abrasives that remove small amounts of material and produce a reflective shine. They are used dry for the final step when refinishing floors.

These grinding discs replace worn discs on compatible floor grinders. Also known as grinding heads, they have built-in abrasive segments spaced along the edge of the disc. Grinding discs are commonly replaced when grinders jump around rather than moving smoothly over surfaces.

Resin pad discs and adapters hold polishing pads onto compatible floor grinders. The discs connect to the grinder and replace broken or missing discs. The adapters allow grinders to hold a different type of polishing pad.

Floor grinder weights sit above the grinding head to increase downward pressure for more aggressive material removal when stripping epoxy, mastic, heavy wax, and other tough coatings. Floor grinder lights attach to the front of a compatible machine to provide visibility when grinding floors in dark spaces.