Nut Driver Sets

Available39 products
Nut drivers look similar to a screwdriver, but have a socket attached to a shaft with an attached handle to turn the tool for tightening or loosening nuts and bolts. The socket fits around and grips around the entire head of the fastener for a secure fit. They provide more contact to the fastener head than an open-end wrench, so the socket is less likely to slip off the fastener when the nut driver is turned. Nut drivers generally have a hollow shaft that allows a threaded bolt to pass through so the tool can turn fasteners on long threaded bolts. They are used for low torque applications compared to wrenches or ratchets that can generate more torque. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Hollow Shank Nut Driver Sets

Hollow Shank Nut Driver Sets
Hollow shank nut driver sets allow for tightening or loosening of fasteners from either the bolt or nut end due to more clearance inside the driver. The hollow shank fits over longer bolts and studs than other nut drivers. These nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Metric

Loading...

SAE

Loading...

Fastener-Holding Nut Driver Sets

Fastener-Holding Nut Driver Sets
Fastener-holding nut driver sets come with a magnet built into their socket ends that holds metal nuts and bolts to the driver's shank. This keeps fasteners in place until they're tightened and helps prevent dropping them during installation. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

SAE

Loading...

Insulated Nut Driver Sets

Insulated Nut Driver Sets
Insulated nut driver sets help prevent electrical shock from live electrical circuits so they're commonly used on or near electrical components. The insulated handle allows for a more secure grip when tightening or loosening nuts and bolts when compared to a noninsulated handle. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Metric

Loading...

SAE

Loading...

Solid Shank Nut Driver Sets

Solid Shank Nut Driver Sets
These solid shank nut driver sets are used to tighten and loosen nuts and bolts and do not have a hollow shank that can fit over long bolts and studs. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Metric

Loading...

SAE

Loading...

Pass-Through Nut Driver Sets

Pass-Through Nut Driver Sets
Pass-through nut driver sets have a hollow shaft and handle so they can tighten and loosen nuts and bolts on any length of threaded rod. They allow the threaded rod to pass through the hollow shaft and handle. Sets come with an assortment of nut drivers for a range of fastener head sizes.

Metric

Loading...

Precision Nut Driver Sets

Precision Nut Driver Sets
These precision nut driver sets are used for tightening and loosening small bolts and hardware and have machined tips for a secure fit on the fastener head. Drivers have handles with a rotating cap that allows the user to hold the shaft of the tool steady while only rotating the cap at the back to help speed fastener installation. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Metric

Loading...

SAE

Loading...

Tether-Ready Nut Driver Sets

Tether-Ready Nut Driver Sets
Tether-ready nut driver sets have a loop or hole that allows the attachment of a tether where the tether is attached to the user or a fixed object to prevent the tool from falling and causing injuries or damage when working at height. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Metric

Loading...

SAE

Loading...

ESD-Safe Precision Nut Driver Sets

ESD-Safe Precision Nut Driver Sets
ESD-safe precision nut driver sets allow the safe and controlled dissipation of static build up when turning small bolts and hardware on static sensitive electrical components and prevent damage from static build up. Drivers have handles with a rotating cap that allows the user to hold the shaft of the tool steady while only rotating the cap at the back to speed fastener installation. Nut driver sets come with an assortment of nut drivers to fit a range of fastener head sizes.

Metric

Loading...

SAE

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top