Pipe & Tubing Connection Tools

Available36 products
These hand tools prepare pipe and tubing for fittings, connect or disconnect fittings, or confirm that fittings are properly connected. They are commonly used when installing and repairing plumbing lines.

Sharkbite Disconnect Tongs & Tools

Sharkbite Disconnect Tongs & Tools

Disconnect tongs and tools grip their jaws onto SharkBite push-to-connect fittings to release them from tubing. They provide more control than disconnect clips. These tongs and tools fit specific tubing sizes.

Loading...

Disconnect Clips for Push-to-Connect Tube Fittings

Disconnect Clips for Push-to-Connect Tube Fittings

Disconnect clips snap onto tubing at the base of a push-to-connect fitting and engage the fitting's release collar to free the tubing. They fit specific tubing sizes and are used where there's clearance to grip around fittings and pull out the tubing.

Loading...

PEX Crimping Tools

PEX Crimping Tools
PEX crimping tools compress crimp rings that join cross-linked polyethylene (PEX) tubing to fittings. Their jaws squeeze the ring to clamp the end of tubing onto the fitting and form a proper seal.
Loading...

PEX Crimping Tool Kits

PEX Crimping Tool Kits
Kits include a PEX crimping tool, interchangeable heads for different sizes of crimp rings, and other components for installing and removing crimp rings. The crimping tool pinches crimp rings that join cross-linked polyethylene (PEX) tubing to fittings. Its jaws squeeze the ring to clamp the end of tubing onto the fitting and form a proper seal.
Loading...

Oetiker PEX Ear Clamping Tools

Oetiker PEX Ear Clamping Tools
Oetiker clamping tools install PEX-style ear clamps that secure fittings within cross-linked polyethylene (PEX) tubing and form a leak-free seal. Also known as PEX ear clamp pincers, they pinch the projection (ear) of the clamp between their jaws to band it tightly around the tubing and the fitting.
Loading...

PEX Crimp Gauges

PEX Crimp Gauges
Crimp gauges check that cross-linked polyethylene (PEX) tubing and fittings are securely joined to ensure a tight seal and prevent leaks. Also known as PEX go/no-go crimp gauges, they have slots for testing the crimp. A proper crimp fits into a "go" slot matching the tubing size but won't fit into the corresponding "no-go" slot.
Loading...

PEX Crimp Ring Removal Tools

PEX Crimp Ring Removal Tools
Removal tools separate crimp rings from cross-linked polyethylene (PEX) tubing to release fittings for reuse. They anchor their bottom jaw within the fitting and squeeze their top blade to slice through the crimp ring. The ring then slides off of the tubing, allowing the fitting to be removed.
Loading...

Compression Sleeve Pullers

Compression Sleeve Pullers
Sleeve pullers remove compression rings and ferrules from copper tubing without damaging the tubing or surrounding surfaces. They slide into the tubing, thread into the compression nut, and walk the compression ring or ferrule off the tubing as the puller handle is turned. Compression sleeve pullers are commonly used to remove sleeves when repairing leaky supply line valves.
Loading...

Riser Removal Tools

Riser Removal Tools
Riser removal tools extract risers from fittings in irrigation and sprinkler systems, allowing replacement of a leaky or broken riser instead of the entire fitting. Their toothed head grips inside the riser and backs it out without damaging the fitting.
Loading...

Replacement Crimping Jaws & Heads

Replacement Crimping Jaws & Heads

These components replace worn jaws and heads on compatible PEX crimping tools. Crimping jaws and heads engage the crimp ring to compress it onto fittings that join lengths of PEX tubing.

Loading...

Parker Fitting Tools

Parker Fitting Tools
These tools install or remove Parker Zoomlock push-to-connect fittings.
Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top