Submersible Level Transmitters

Available101 products

Submersible-level transmitters are placed at the bottom of a tank, well, or other liquid container. They have a transmitter that’s connected to a long cable for measuring the level of liquids at deep locations. Also known as liquid-level transmitters, they have waterproof and rustproof 316 stainless steel wetted parts. Submersible-level transmitters are used in water management applications.

Submersible Level Transmitters for Tanks & Groundwater

Submersible Level Transmitters for Tanks & Groundwater

These bullet-nose level transmitters convert pressure readings into an electrical signal which is transmitted to a remote-control room or monitoring panel. They install into a pipe or conduit with a threaded probe or can be suspended in a tank with a hanging loop. These transmitters are commonly used for well, ground, and surface water monitoring, environmental remediation, and for monitoring pressure in water tanks.

4 to 20mA DC

Loading...

Submersible Level Transmitters for Harsh Applications

Submersible Level Transmitters for Harsh Applications

These transmitters convert pressure readings in harsh areas into electrical signals that are transmitted to a remote-control room or monitoring panel. Flush-tip transmitters have a stick-resistant coating that helps protect them from aggressive fluids. Birdcage transmitters have sensors that are shielded by a cage-style housing. These durable transmitters resist clogging and are commonly used for harsh applications in wastewater and slurries, chemical storage tanks, oil tanks, sumps, and sewage lift stations.

Bird Cage

4 to 20mA DC Output

Loading...

Flush Tip

4 to 20mA DC Output

Loading...

Miniature Level Transmitters for Boreholes & Wells

Miniature Level Transmitters for Boreholes & Wells

These miniature submersible-level transmitters have a long cable attached to a compact bullet sensor with a very small diameter. The sensor is lowered into tanks, wells, or down small boreholes to sense and convert pressure readings into electrical signals. These output signals are then sent through the cable to a control room or panel. They are often used for well, ground, and surface water monitoring, remote telemetry applications, remediation, and for narrow conduit or pipe installations and pump protection. 

0 to 5V DC

Loading...

4 to 20mA DC

Loading...
Loading...

Submersible Level Transmitter Accessories

Submersible Level Transmitter Accessories

These accessories help enhance or maintain the performance of submersible-level transmitters. 

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top