General Purpose Pressure Transmitters
General purpose pressure transmitters convert pressure from liquids, gases, and vapors into electrical output signals. They have threaded process connections for direct mounting to systems, and electrical terminations to connect to compatible control systems for monitoring. Also known as pressure sensors and pressure transducers, they're commonly used for process automation and control, pneumatic sensing, presses and machine tools, and industrial and commercial HVAC and refrigeration applications.Â
Pressure Transmitters with Cable & Wire Leads
These pressure transmitters have a threaded process connection and pigtail-style bare wire leads with an integral cable.
0 to 10VDC Output – 3 Wires
| Loading... | ||||||||
0 to 5VDC Output – 3 Wires
| Loading... | ||||||||
0.5 to 4.5V DC Output – 2 Wires
| Loading... | ||||||||
1 to 5V DC Output – 3 Wires
| Loading... | ||||||||
4 to 20mA DC Output
| Loading... | ||||||||
4 to 20mA DC Output – 2 Wires
| Loading... | ||||||||
| Loading... | ||||||||
| Loading... | ||||||||
Pressure Transmitters with DIN 43650 Form A Connector
These pressure transmitters have a threaded process connection and DIN 43650 Form A electrical termination. This connector type conforms to, and is also known as, DIN EN 175301-803, Form A.Â
1 to 5V DC Output – 3 Wires
| Loading... | |||||||
| Loading... | |||||||
4 to 20mA Output
| Loading... | |||||||
4 to 20mA DC Output – 2 Wires
| Loading... | |||||||
| Loading... | |||||||
Pressure Transmitters with 4-Pin DIN 43650 Form C Connector
These pressure transmitters have a threaded process connection and a 4-pin DIN 43650 Form C connector. This connector type conforms to, and is also known as, DIN EN 175801-803-C.
4 to 20mA DC Output – 2 Wires
| Loading... | |||||||
Pressure Transmitters with 4-Pin M12 Connector
These pressure transmitters have a threaded process connection and male-threaded M12 4-pin electrical connector.
0 to 10V DC Output – 2 Wires
| Loading... | |||||||
0 to 10V DC Output – 3 Wires
| Loading... | |||||||
1 to 5V DC Output – 3 Wires
| Loading... | |||||||
4 to 20mA DC Output – 2 Wires
| Loading... | |||||||
| Loading... | |||||||
Pressure Transmitters with 4-Pin Mini-DIN Connector
Also called Hirschmann G Series-style connections, 4-pin compact transmitters are built with thin-film technology to reduce noise levels and temperature fluctuations. These transmitters are compatible with most types of fluids, and are often used in small or confined spaces.
1 to 5V DC Output – 3 Wires
| Loading... | |||||||
4 to 20mA DC Output – 2 Wires
| Loading... | |||||||
Pressure Transmitters with 3-Pin Packard Connector
These pressure transmitters have a threaded process connection and a 3-pin Packard connector, integral either to the transducer itself or to an included cable.
0 to 10V DC Output – 2 Wires
General Purpose Pressure Transmitters | Wiring Harness (Optional) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
0 to 10V DC Output – 3 Wires
General Purpose Pressure Transmitters | Wiring Harness (Optional) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
0.5 to 4.5V DC Output – 2 Wires
General Purpose Pressure Transmitters | Wiring Harness (Optional) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
0.5 to 4.5V DC Output – 3 Wires
General Purpose Pressure Transmitters | Wiring Harness (Optional) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
4 to 20mA DC Output – 2 Wires
General Purpose Pressure Transmitters | Wiring Harness (Optional) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
4 to 20mA DC Output – 3 Wires
General Purpose Pressure Transmitters | Wiring Harness (Optional) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Loading... | |||||||||||
Pressure Transmitters with Conduit Connection
These pressure transmitters have a conduit housing with a threaded process connection and a threaded conduit connection for wire entry.
4 to 20mA DC Output – 2 Wires
| Loading... | ||||||