Chemical- & Cut-Resistant Gloves

Available72 products
Chemical- and cut-resistant gloves are made of rubber polymers and are ANSI/ISEA-rated for cut protection to protect workers from hand injuries caused by hazardous liquids and cut hazards. Higher cut levels (A9) provide more cut protection than lower levels (A2). Chemical-resistant gloves withstand exposure to acids, bases, solvents, and other chemicals and are worn by workers in chemical manufacturing, researchers, and others who come into contact with chemicals. Gloves with higher levels of chemical resistance are generally thicker. Thinner gloves have a better sense of touch but less chemical resistance.

A2 Cut-Level PVC Chemical-Resistant Gloves with Full-Dip PVC Coating & Kevlar Liner, Supported

A2 Cut-Level PVC Chemical-Resistant Gloves with Full-Dip PVC Coating & Kevlar Liner, Supported
These chemical-resistant gloves have a full-dip PVC coating with a supported Kevlar liner and provide ANSI/ISEA A2 cut-level protection. Polyvinylchloride (PVC) gloves are abrasion-resistant and provide excellent resistance to acids, fats, and petroleum hydrocarbons. PVC remains flexible at a wide range of temperatures and can be used at low temperatures such as those encountered when working outdoors with refrigerated items. The supported Kevlar liner is incorporated into the glove material to create a lightweight, heat-resistant glove that has excellent durability when used fully submerged in liquid. A2 cut-level gloves protect hands from light cut hazards such as handling plastic, thin sheet metal, and other light raw materials.

General Purpose

Loading...

A2 Cut-Level Nitrile Chemical-Resistant Gloves with Palm-Dipped Nitrile Coating & Acrylic Liner, Supported

A2 Cut-Level Nitrile Chemical-Resistant Gloves with Palm-Dipped Nitrile Coating & Acrylic Liner, Supported

These nitrile chemical-resistant gloves have a palm-dip nitrile coating with a supported acrylic liner and provide ANSI/ISEA A2 cut-level protection. The nitrile coating on the palm side of the hand and fingers resists abrasion and oils and provides a secure grip when working with dry, greasy, and oily parts. The supported acrylic liner is incorporated into the glove material to insulate hands from heat and cold and when submerged in liquid. A2 cut-level gloves protect hands from light cut hazards such as handling plastic, thin sheet metal, and other light raw materials.

Loading...

A5 Cut-Level Neoprene Chemical-Resistant Gloves with HPPE Liner, Supported

A5 Cut-Level Neoprene Chemical-Resistant Gloves with HPPE Liner, Supported
These neoprene chemical-resistant gloves have a supported HPPE liner and provide ANSI/ISEA A5 cut-level protection. Neoprene gloves are flexible, have a high tensile strength, and are resistant to a broad range of oils, acids, alcohols, fats, ketones, caustics, solvents, greases, and petrochemicals. HPPE (high-performance polyethylene) is a low-linting and lightweight material that provides good durability and cut protection while remaining soft and comfortable. Supported gloves incorporate the liner into the glove for better durability over unsupported gloves, making them a good choice for tasks when gloves are fully submerged in liquid. ANSI/ISEA A5 cut-level gloves protect hands when encountering medium to heavy cut hazards, such as those found when handling light glass and recycling materials, working with raw materials, metal stamping and fabrication, and when installing HVAC ductwork.

General Purpose

Loading...

A3 Cut-Level & Level 1 Impact-Rated PVC Chemical-Resistant Gloves with Polyester Liner, Supported

A3 Cut-Level & Level 1 Impact-Rated PVC Chemical-Resistant Gloves with Polyester Liner, Supported
These A3 cut-level chemical-resistant gloves have a full-dip PVC coating with a supported polyester liner and provide level 1 impact protection. Polyvinylchloride (PVC) gloves are abrasion-resistant and provide excellent resistance to acids, fats, and petroleum hydrocarbons. PVC remains flexible at a wide range of temperatures and can be used at low temperatures such as those encountered when working outdoors with refrigerated items. The supported polyester liner is lightweight, has a smooth texture, wicks moisture away from the skin, and is durable when working submerged in liquid. ANSI/ISEA impact-level 1 gloves protect against injuries caused by knocks and bumps encountered in everyday work, such as those performed in general construction and assembly. A3 cut-level gloves protect hands from light to medium cut hazards, such as those found when performing general warehouse work, working with cement blocks, and when handling plastic and light raw materials.

General Purpose

Loading...

General Purpose with Extended Cuff

Loading...

A4 Cut-Level PVC/Nitrile Chemical-Resistant Gloves with HPPE Liner, Supported

A4 Cut-Level PVC/Nitrile Chemical-Resistant Gloves with HPPE Liner, Supported
These ANSI/ISEA A4 cut-level PVC/nitrile chemical-resistant gloves have a supported HPPE liner. PVC/nitrile-blend gloves provide a liquid-resistant barrier and excellent resistance to most chemicals and oils. The blend generally provides better resistance to solvents and abrasion than PVC alone. The supported HPPE (high-performance polyethylene) liner is incorporated into the glove material to create a low-linting lightweight glove that is durable, soft, and comfortable while fully submerged in liquid. ANSI/ISEA A4 cut-level gloves protect hands from medium cut hazards found when performing automotive assembly tasks, installing HVAC ductwork, and handling light glass and light stamped metal.

General Purpose

Loading...

A4 Cut-Level & Level 1 Impact-Rated Nitrile Chemical-Resistant Gloves with Palm-Dipped Nitrile Coating & HPPE Liner, Supported

A4 Cut-Level & Level 1 Impact-Rated Nitrile Chemical-Resistant Gloves with Palm-Dipped Nitrile Coating & HPPE Liner, Supported
These A4 cut-level and level 1 impact-rated chemical-resistant gloves have a palm-dipped nitrile coating with a supported HPPE liner. The nitrile coating on the palm side of the hand and fingers resists abrasion and oils and provides a secure grip when working with dry, greasy, and oily parts. The supported HPPE (high-performance polyethylene) liner is incorporated into the glove material to create a low-linting lightweight glove that is durable, soft, and comfortable while fully submerged in liquid. ANSI/ISEA impact-level 1 gloves protect against injuries caused by knocks and bumps encountered in everyday work, such as those performed in general construction and assembly. ANSI/ISEA A4 cut-level gloves protect hands from medium cut hazards found when performing automotive assembly tasks, installing HVAC ductwork, and handling light glass and light stamped metal.

General Purpose

Loading...

High Dexterity

Loading...

A3 Cut-Level Nitrile Chemical-Resistant Gloves with Nylon Liner, Supported

A3 Cut-Level Nitrile Chemical-Resistant Gloves with Nylon Liner, Supported

These A3 cut-level chemical-resistant gloves have a nitrile coating with a supported nylon liner. The nitrile coating on the palm side of the hand and fingers resists abrasion and oils and provides a secure grip when working with dry, greasy, and oily parts. Nylon glove liners wick moisture away from the skin. They are durable, resist pilling, and produce less lint than other fibers. Supported gloves incorporate the liner into the glove for better durability over unsupported gloves, making them a good choice for tasks when gloves are fully submerged in liquid. ANSI/ISEA A3 cut-level gloves protect hands from light to medium cut hazards, such as those found when performing general warehouse work, working with cement blocks, and when handling plastic and light raw materials.

Ergonomic

Loading...

High Grip

Loading...

A4 Cut-Level & Level 2 Impact-Rated PVC Chemical-Resistant Gloves with HPPE Liner, Supported

A4 Cut-Level & Level 2 Impact-Rated PVC Chemical-Resistant Gloves with HPPE Liner, Supported
These chemical-resistant A4 cut-level and level 2 impact-rated gloves have a PVC coating and a supported HPPE liner. Polyvinylchloride (PVC) is abrasion-resistant and provides excellent resistance to acids, fats, and petroleum hydrocarbons. It remains flexible at a wide range of temperatures and can be used at low temperatures, including working outdoors and handling refrigerated items. HPPE (high-performance polyethylene) is a low-linting and lightweight material that provides good durability and cut protection while remaining soft and comfortable. ANSI/ISEA impact-level 2 gloves protect against impact injuries caused when working with equipment that can be found in heavy construction, demolition work, and forestry. ANSI/ISEA A4 cut-level gloves protect hands from medium cut hazards found when performing automotive assembly tasks, installing HVAC ductwork, and handling light glass and light stamped metal.
Loading...

A5 Cut-Level & Level 2 Impact-Rated Kevlar Chemical-Resistant Gloves, Supported

A5 Cut-Level & Level 2 Impact-Rated Kevlar Chemical-Resistant Gloves, Supported
Loading...

A5 Cut-Level & Level 2 Impact-Rated PVC Chemical-Resistant Gloves with Aramid Liner, Supported

A5 Cut-Level & Level 2 Impact-Rated PVC Chemical-Resistant Gloves with Aramid Liner, Supported
These A5 cut-level chemical-resistant and level 2 impact-rated gloves have a full-dip PVC coating. Polyvinylchloride (PVC) is abrasion-resistant and provides excellent resistance to acids, fats, and petroleum hydrocarbons. It remains flexible at a wide range of temperatures and can be used at low temperatures, including working outdoors and handling refrigerated items. Aramid is a lightweight and heat-resistant fabric with excellent durability and cut protection. Supported gloves incorporate the liner into the glove for increased durability, making them suitable for working fully submerged in liquid. ANSI/ISEA impact-level 2 gloves protect against impact injuries caused when working with equipment that can be found in heavy construction, demolition work, and forestry. ANSI/ISEA A5 cut-level gloves protect against medium to heavy cut hazards, such as those found when handling light glass and installing HVAC ductwork.

High Grip

Loading...

A7 Cut-Level & Level 2 Impact-Rated Neoprene/Nitrile Chemical-Resistant Gloves with HPPE Liner, Supported

A7 Cut-Level & Level 2 Impact-Rated Neoprene/Nitrile Chemical-Resistant Gloves with HPPE Liner, Supported
These chemical-resistant A7 cut-level and level 2 impact-rated gloves have a neoprene/nitrile coating and a supported HPPE liner. HPPE (high-performance polyethylene) is a low-linting and lightweight material that provides good durability and cut protection while remaining soft and comfortable. Neoprene/nitrile is flexible, resists abrasion, and can be used near a broad range of oils, acids, alcohols, fats, ketones, caustics, and solvents. ANSI/ISEA A7 cut-level gloves protect hands when encountering heavy cut hazards, such as those encountered in metal stamping and fabrication, carpet installation, pulp and paper processing, handling steel cable, and installing heavy plate-glass windows.
Loading...

A6 Cut-Level PVC Chemical-Resistant Gloves with Aramid Liner

A6 Cut-Level PVC Chemical-Resistant Gloves with Aramid Liner

These A6 cut-level chemical-resistant gloves have a full-dip PVC coating and an aramid liner. Polyvinylchloride (PVC) is abrasion-resistant and provides excellent resistance to acids, fats, and petroleum hydrocarbons. It remains flexible at a wide range of temperatures and can be used at low temperatures, including working outdoors and handling refrigerated items. Aramid is a lightweight and heat-resistant fabric with excellent durability and cut protection. ANSI/ISEA A6 cut-level gloves protect hands from medium to heavy cut hazards, such as those encountered in automotive assembly, metal stamping and fabrication, and when handling slitter blades. 

Loading...

A4 Cut-Level Nitrile Chemical-Resistant Gloves

A4 Cut-Level Nitrile Chemical-Resistant Gloves

These A4 cut-level chemical-resistant gloves have a palm-dipped nitrile coating with a supported HPPE liner. The nitrile coating on the palm side of the hand and fingers resists abrasion and oils and provides a secure grip when working with dry, greasy, and oily parts. The supported HPPE (high-performance polyethylene) liner is incorporated into the glove material to create a low-linting lightweight glove that is durable, soft, and comfortable while fully submerged in liquid. ANSI/ISEA A4 cut-level gloves protect hands from medium cut hazards found when performing automotive assembly tasks, installing HVAC ductwork, and handling light glass and light stamped metal. 

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top