PVC (polyvinyl chloride) swing check valves are made from a corrosion- and chemical-resistant plastic resin.

PVC (polyvinyl chloride) silent spring-loaded swing check valves are made from a corrosion- and chemical-resistant plastic resin. Silent spring-loaded check valves prevent sharp increases in system pressure, also known as water hammer.

Cast iron swing check valves are vibration-resistant, impact-resistant, and suitable for high-temperature applications.

ABS (acrylonitrile butadiene styrene) silent swing check valves are durable, corrosion-resistant, and wear-resistant, and their spring mechanism prevents sharp increases in system pressure when closing, also known as water hammer.

PVC (polyvinyl chloride) combination swing check and ball valves are made from a corrosion- and chemical-resistant plastic resin. They have a swinging disc inside the valve body that opens as liquids travel through the system in the intended direction and closes when pressure on the inlet side drops below the pressure on the outlet side. A ball valve on the outlet port of the swing check valve stops water flow for maintenance or if the swing check valve fails.

PVC (polyvinyl chloride) combination silent spring-loaded swing check and ball valves are made from a corrosion- and chemical-resistant plastic resin. Silent spring-loaded check valves prevent sharp increases in system pressure, also known as water hammer. These units have a ball valve connected to the outlet to stop and start media flow traveling through the valve for maintenance or if the swing check valve fails.

TPR (thermoplastic rubber) swing check valves are abrasion-, impact-, and corrosion-resistant.