Loop Hangers for Tube & Pipe
Available219 products
Loop hangers use gravity to cradle suspended tube or pipe for a secure hold. They are typically suspended from overhead with a threaded rod. These loop hangers are designed for systems with no thermal expansion where the pipe or tube remains stationary.
Standard Loop Hangers for Tube & Pipe
These standard loop hangers hold non-insulated tube or pipe that is suspended with a threaded rod and are often used to route mechanical pipelines.
Non-Swivel Loop
304 Stainless Steel
| Loading... | ||||
Swivel Loop
Copper-Plated Steel
| Loading... | ||||
Pre-Galvanized Steel
| Loading... | ||||
Pre-Galvanized Steel / Felt
| Loading... | ||||
Zinc-Plated Steel
| Loading... | ||||
Clevis Hangers for Tube & Pipe
Clevis hangers are intended for non-insulated tube or pipe and have a bottom half that can pivot up or down to allow pipe or tube to feed through in different directions.
304 Stainless Steel
| Loading... | ||||
Copper-Plated Steel
| Loading... | ||||
Electro-Galvanized Steel
| Loading... | ||||
Pre-Galvanized Steel
| Loading... | ||||
Primed Steel
| Loading... | ||||
Steel
| Loading... | ||||
Zinc-Plated Steel
| Loading... | ||||
Clevis Hangers with Insulation Saddle for Tube & Pipe
These clevis hangers have a strip of insulation in their clamp saddle for holding insulated tube or pipe with chilled or heated water. A notch needs to be cut in the pipe's insulation to fit around the insulation strip in the clamp saddle.
Steel
| Loading... | |||||
Zinc-Plated Steel
| Loading... | |||||
J-Style Hangers for Tube & Pipe
J-style hangers can be added to an existing installation by removing a side bolt in the clamp to insert tube or pipe. They have mounting holes on the top for mounting to a threaded rod, or on the sides for mounting to a surface. J-style hangers get their name from the "J" shape of the clamp.
Electro-Galvanized Steel
| Loading... | ||||
Felt Lined Steel
| Loading... | ||||
Zinc-Plated Steel
| Loading... | ||||