Worm Gear Tube & Hose Clamps
Available325 products
Worm gear clamps, also called worm drive clamps, secure tube and hose connections to ensure a tight fit and prevent fluid and air from leaking. They’re called worm gear clamps because of the housed, helical-threaded screw that engages with the slots in the band and tightens the band as the screw turns. Worm gear clamps are non-permanent and remove in the same way they are installed, easing maintenance. They are used in a variety of automotive and industrial applications to secure hose and tube connections.
Standard Worm Gear Clamps
These standard worm gear clamps are useful in general purpose applications to secure tube and hose connections. A hand tool such as a hex-nut driver or screwdriver tightens the clamp.
Perforated 301 300 Stainless Steel Band
9/16 in Band Width
| Loading... | ||||||
Perforated 201 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||||
| Loading... | ||||||
9/16 in Band Width
| Loading... | ||||||
Perforated 301 Stainless Steel Band
5/16 in Band Width
| Loading... | ||||||
1/2 in Band Width
| Loading... | ||||||
9/16 in Band Width
| Loading... | ||||||
Perforated 304 Stainless Steel Band
5/16 in Band Width
| Loading... | ||||||
1/2 in Band Width
| Loading... | ||||||
9/16 in Band Width
| Loading... | ||||||
Embossed 304 Stainless Steel Band
9 mm Band Width
| Loading... | ||||||
Lined 201 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||||
Lined 304 Stainless Steel Band
5/8 in Band Width
| Loading... | ||||||
Lined 316 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||||
Recessed Bead-Lined 301 Stainless Steel Band
9/16 in Band Width
| Loading... | ||||||
Collared Screw Worm Gear Clamps
These worm gear clamps have a hex screw with a collared head that provides a secure slot to insert the screwdriver while tightening the clamp. They prevent the screwdriver from slipping to avoid damage to the hose surface.
Perforated 201 Stainless Steel Band
9/16 in Band Width
| Loading... | ||||||
Hand-Twist Turn Key Worm Gear Clamps
Turn-key worm gear clamps tighten by hand without the use of tools. They have a reusable plastic screw cap that provides grip and leverage to tighten the clamp and can be removed to prevent tampering. These clamps are useful in applications such as dryer vent hoses and RV sewer lines.
Perforated 201 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||||
Self-Tensioning Worm Gear Clamps
Self-tensioning worm gear clamps have a spring-loaded screw that adjusts to vibration and temperature fluctuations to maintain a tight connection on the tube or hose and prevent leaks. A hand tool such as a hex-nut driver or screwdriver tightens the clamp.
Lined 304 Stainless Steel Band
5/8 in Band Width
Fastener Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Loading... | ||||||||
Quick-Release Worm Gear Clamps
Quick-release worm gear clamps disengage completely to install on connected tube or hose in a closed system. The swivel-action locking of the screw to the band hastens installation and removal of the clamp. A hand tool such as a hex-nut driver or screwdriver tightens the clamp.
Perforated 201 Stainless Steel Band
9/16 in Band Width
Fastener Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Loading... | ||||||||
Quick-Install Worm Gear Clamps
Quick-install worm gear clamps have a pull-through band that slides smoothly without binding. These clamps have a "captive screw" that is integrated into the clamp and do not completely disengage. This design allows for quick installation and tensioning of the clamp with a hand tool such as a hex-nut driver or screwdriver.
Perforated 304 Stainless Steel Band
9/16 in Band Width
| Loading... | ||||||
Duct Hose Worm Gear Bridge Clamps
Duct hose worm gear bridge clamps ensure a tight seal on hose that has a raised wire helix which reinforces and maintains the shape of the hose. These clamps are designed to bridge the wire helix so that the clamp sits snug on the hose. Right-hand clamps fit clockwise spiraling wire helix and left-hand clamps fit counterclockwise spiraling wire helix. Duct hoses are used to blow, vacuum, or vent air, fumes, dust, powder, chips, liquid waste, and more.
304 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||
Stainless Steel Band
1/2 in Band Width
| Loading... | ||||
Military Specification Worm Gear Clamps
These worm gear clamps are stamped on their band with MS-35842 military specification (Mil Spec), indicating they are manufactured in the US and meet the SAE J1508 standard for characteristics and performance requirements set by the Society of Automotive Engineers. A hand tool such as a hex-nut driver or screwdriver tightens the clamp.
Perforated 201 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||||
Double-Locking Worm Gear Clamps
Double-locking worm gear clamps have a second locking mechanism to secure tube and hose connections in high pressure systems. A hand tool such as a hex-nut driver or screwdriver tightens the clamp.
Perforated 301 Stainless Steel Band
1/2 in Band Width
| Loading... | ||||||