Floor mounts anchor T-slot framing structures to a floor for stability. They install onto the bottom of a structure and are secured to a floor with bolts or other hardware.

Pivot leveling feet install onto the bottom of a T-slot framing structure and can be individually adjusted to level the structure on uneven flooring. Each foot has a jam nut that allows the foot to pivot up to 20°. The feet can be installed into a tapped hole on the end of a framing profile, or they can be mounted to a profile with a compatible base plate.

These base plates allow feet and casters with threaded stems to be mounted to the ends or sides of T-slot framing profiles. Each plate has a tapped hole that accepts the threaded stem on the caster or foot. An end tap is required when mounting the plate to a profile end.

These base plates allow plate casters to be mounted to the ends or sides of T-slot framing profiles. Each plate has holes that match the mounting hole pattern on a plate caster. An end tap is required when mounting the plate to a profile end.

Swivel plate casters rotate up to 360° to change direction and navigate turns while rolling. Each caster has a mounting plate that attaches to a compatible base plate on the end of a T-slot framing profile. The casters are used for building carts, workstations, and other mobile T-slot framing structures.

Swivel threaded-stem casters rotate up to 360° to change direction and navigate turns while rolling. Each caster has a threaded stem that attaches to a compatible base plate on the end of a T-slot framing profile. The casters are used for building carts, workstations, and other mobile T-slot framing structures.

T-slot mount plate casters attach to the slot on the face of a T-slot framing profile and do not require a base plate for installation. The casters allow structures to roll and are used for building carts, workstations, and other mobile T-slot framing structures.