Machinist Squares & Sets

Available68 products
Machinist squares and sets assist with aligning workpieces, measuring and marking angles, and setting up machinery. Also known as precision steel squares, they are made to tight tolerances for applications that require greater accuracy than typical building and layout squares. Their blades are hardened and ground to remain straight and parallel. They are commonly used in machine shops, woodworking shops, and other production environments.

Machinist Precision Steel Square Sets

Machinist Precision Steel Square Sets

Machinist precision steel square sets contain squares of different sizes. Each square has two legs set at a fixed angle to measure and mark inside and outside angles of a specific size. The squares guide measurements, markings, and cuts, and they are sometimes stood on end for vertical applications.

Loading...

Machinist Precision Steel Squares

Machinist Precision Steel Squares
Machinist precision steel squares have two legs set at a fixed angle to measure and mark inside and outside angles of a specific size. They guide measurements, markings, and cuts, and they are sometimes stood on end for vertical applications.

45 ° Angle

Loading...

60 ° Angle

Loading...

90 ° Angle

Loading...

135 ° Angle

Loading...

Machinist Precision Steel Combination Squares

Machinist Precision Steel Combination Squares
Machinist precision steel combination squares lay out 90° angles with their anvil, lay out 45° angles with their shoulder, and check level and plumb with their bubble vials. Also known as precision combo squares, these multifunctional tools assist with gauging flatness, aligning tool blades and fences, setting bevel angles on saws and jointers, striking long lines on workpieces, and more. They include a square head but also accept other types of compatible heads to perform additional measurement and layout tasks.

Inch Measurements

Loading...

Metric Measurements

Loading...

Machinist Precision Steel Combination Square Sets

Machinist Precision Steel Combination Square Sets
Machinist precision steel combination square sets include interchangeable heads for different measurement and marking tasks. Their square head lays out 90° angles with its anvil, lays out 45° angles with its shoulder, and checks level and plumb with its bubble vials. It assists with gauging flatness, aligning tool blades and fences, setting bevel angles on saws and jointers, striking long lines on workpieces, and more. Their other heads perform more specialized functions such as finding center and measuring a large range of angles.

Inch Measurements

Loading...

Inch/Metric Measurements

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top