Locating Pins
Available151 products
Locating pins accurately position and maintain the location of workpieces in workholding applications. Also referred to as workholding bolts or headed dowels, they have cylindrical mounting shanks and a locating head. They are inserted into the tool body or plate to properly locate the workpiece on horizontal X and Y axes.
Stepped Round Locating Pins
These locating pins have stepped, round locating heads with slightly tapered sides and a flat surface on the top. They are used to position workpieces in reamed holes, as stops, or as fixture feet.
Tool Steel Body
| Loading... | ||||||
Stepped Diamond Locating Pins
These locating pins have stepped, diamond-shaped heads that are flattened on four sides. They provide single-direction positioning of workpieces or bridge tolerances in hole spacing when used with another locating pin.
Tool Steel Body
| Loading... | ||||||
Round Locating Rest Pads
These locating rest pads have mounting shanks and round heads with larger diameters than their shanks. Their heads have large flat surfaces to support workpieces and fixtures.
Tool Steel Body
| Loading... | ||||||
Ball-End Locating Pins
These locating pins have rounded, ball-type heads that minimize possible binding or jamming when utilized for positioning applications in bores.
Stainless Steel Body
| Loading... | ||||||
Tool Steel Body
| Loading... | ||||||
Flattened Ball-End Locating Pins
These locating pins have diamond-shaped, ball-type heads that are flattened on four sides. They provide single-direction positioning of workpieces or compensate tolerances in spacing between two bores.
Stainless Steel Body
| Loading... | ||||||
Tool Steel Body
| Loading... | ||||||
Tapered-Head Locating Pins
These locating pins have tapered, cone-shaped heads and combine with bushings for quick workpiece exchanges. They have an internal thread for mounting.
Steel Body
| Loading... | |||||||
Flattened Tapered-Head Locating Pins
These locating pins have tapered, cone-shaped heads that are flattened on four sides. They combine with locating bushings for quick workpiece exchanges and have an internal thread for mounting.
Steel Body
| Loading... | |||||||
Extractable Diamond Locating Pins
These extractable locating pins have diamond-shaped shoulders that are flattened on four sides and shanks with equal diameter to their locating heads. They compensate for tolerances in spacing between two bores and can be removed with a locating pin extractor when replacement is necessary.
Tool Steel Body
| Loading... | |||||
Extractable Stepped Diamond Locating Pins
These extractable stepped locating pins have diamond-shaped heads that are flattened on four sides and shanks with smaller diameters than their locating heads. They compensate for tolerances in spacing between two bores and can be removed with a locating pin extractor when replacement is necessary.
Tool Steel Body
| Loading... | |||||
Extractable Round Locating Pins
These extractable round locating pins have shanks and heads of equal diameter and secure workpieces in either direction horizontally. They can be removed with a locating pin extractor when replacement is necessary.
Tool Steel Body
| Loading... | ||||||
Extractable Stepped Round Locating Pins
These extractable stepped round locating pins have smaller diameter shanks than their locating heads and secure workpieces in either direction horizontally. They can be removed with a locating pin extractor when replacement is necessary.
Tool Steel Body
| Loading... | |||||
Locating Pin & Dowel Pin Extractors
These locating pin extractors, also known as dowel pin extractors, remove locating and centering pins from tool bodies or plates when replacement is needed.
Carbon Steel Head Material; Steel Body
| Loading... | ||||