Food-Grade Multipurpose Grease - Grainger Industrial Supply

Previously Purchased

In Stock at Branch

NSF Rating

H1 Food Grade indicates the lubricant can be used in and around food processing areas where incidental contact may occur and does not pose a health risk if consumed in diminutive amounts.
H2 No Food Contact indicates the lubricant is intended for machinery and equipment that is used in areas with no possibility of direct contact with food.
H3 Food Grade indicates the lubricant is intended for equipment that comes into direct contact with food and is safe for human consumption.

H1 Food Grade
H2 No Food Contact
H3 Food Grade

Properties

The specific properties of the lubricant.

Dielectric insulates sensitive electrical components against conductivity to protect against galvanic corrosion.
Extended Life also referred to as EL, performs twice as long than standard lubricants for high-demand applications where there's a need to extend the time between lubricant changes.
Extreme Pressure also referred to as EP, maintains a lubricating layer between surfaces in highly pressurized conditions where standard lubricants degrade and squeeze out.
High Temperature maintains lubricating performance and will not drip or degrade when exposed to high heat.
Low Temperature maintains lubricating performance under freezing conditions as well as contact with ice, road salt, and humidity.
Rust and Oxidation Resistant prevents rust, oxidation, and deposit formation to protect internal machine components and extend their operating life.
Water Resistant inhibits corrosion and rust while maintaining lubricating performance in conditions with prolonged exposure to water.

Dielectric
Extended Life
Extreme Pressure
High Temperature
Low Temperature
Rust and Oxidation Resistant
Water Resistant

Environmentally Acceptable Lubricant

Environmentally Acceptable Lubricants (EAL) must meet the standards set by the Environmental Protection Agency (EPA) that require lubricants to be inherently biodegradable, minimally toxic, and nonbioaccumulative.

Brand

Search Brand

ANTI-SEIZE TECHNOLOGY
CRC
JET-LUBE
KRYTOX
LOCTITE
LPS DETEX
LUBRIPLATE
MOBIL
MOLYKOTE
PETROCHEM
SPRAYON
SUPER LUBE
TRI-FLOW
WD-40 SPECIALIST
ZEP

Series

Search Series

Container Size

Search Container Size

Container Type

Pouch
Tube
Syringe
Cartridge
Aerosol Can
Metal-Detectable Aerosol Can
Can
Jar
Pail
Drum

NLGI Viscosity Grade

The consistency of the grease based on a scale from 000 (fluid) to 6 (hard) established by the National Lubricating Grease Institute which evaluates the grease using the ASTM D217 testing standard at 77°F.

1 has the soft consistency of tomato paste.
2 has the standard consistency of peanut butter.
3 has the firm consistency of margarine or shortening.

Base Oil

The primary oil in the lubricant's formula that offers unique properties.

Mineral is a standard base oil that is naturally-occurring.
Semi-Synthetic is a mixture of mineral oil and chemically-engineered oil that offers higher heat resistance than mineral oil alone.
Silicone is a manufactured oil that repels moisture and is suitable for sensitive surfaces such as electronics.
Synthetic is a chemically-engineered oil with more uniformity and a higher resistance to heat than other base oils.

Mineral
Semi-Synthetic
Silicone
Synthetic

Thickener

Thickeners are added to fluid lubricants to create the semi-solid consistency of grease.

Aluminum Complex is a complex soap with higher resistance to heat, water washout, and oxidation than aluminum simple soap.
Calcium Sulfonate is a nonsoap thickener for extreme pressure (EP) applications with resistance to wear, water, and high temperatures.
Lithium is a simple soap that withstands mechanical shearing and has good resistance to water, heat, and oil separation.
Lithium Complex is a complex soap with higher dropping points than simple soap for high-temperature applications.
PTFE is a nonsoap thickener that has good lubricity and resists heat, water, and mechanical shearing.
Silica is a nonsoap thickener that resists heat and has a small particle size for an efficient thickener.

Aluminum Complex
Calcium Sulfonate
Lithium
Lithium Complex
PTFE
Silica

Minimum Operating Temperature

-76 °F to 0 °F
1 °F or More

Maximum Operating Temperature

200 °F to 300 °F
301 °F or More

Color

Clear
Tan
White

Additive

Substances that are added to the base oil to modify the lubricant's properties.

Molybdenum also referred to as moly, this material reduces friction and wear between sliding metal surfaces in applications with heavy loads.
Zinc resists extreme pressures (EP), inhibits oxidation, and prevents wear from shock and heavy load applications. Also known as ZDDP.

Molybdenum
Zinc

Flash Point

Flash point is based on the ASTM D92 standard that determines the flammability of the lubricant and identifies the minimum temperature at which the lubricant forms an ignitable vapor.

300 °F or Less
301 °F to 500 °F
501 °F or More

Dropping Point

Dropping point is based on the ASTM D2265 standard that determines the heat resistance of the grease. It identifies the temperature at which the grease liquifies and loses the desired consistency.

400 °F or Less
401 °F to 600 °F
601 °F or More

Pour Point

The pour point is the lowest temperature at which the lubricant can still flow with gravity, and indicates a lubricant's resistance to cold temperatures. Based on the ASTM D97-96a test method, the pour point is 5°F above the temperature at which the lubricant shows no movement when held upside down for 5 seconds.

0 °F or More
-20 °F or Less
-19 °F to 0 °F

Timken OK Load

Timken OK Load is based on the ASTM D2509 standard that determines the lubricant's load-carrying capacity and resistance to pressure. The higher the value, measured in pounds, the better the lubricant performs.

30 lb or Less
31 lb to 50 lb
51 lb or More

Four-Ball Wear

Four-ball wear is based on the ASTM D2266 standard that determines the wear resistance of grease. Smaller measurements, in millimeters, indicate better resistance.

0.50 mm or Less
0.51 mm or More

Standards

Search Standards

Price

Min

Max

Only digits are allowed. Maximum amount of digits: 6.

All Products

Line by Line

Sign In

Order Lookup

Incidental Contact (NSF H1) Food-Grade Grease

LUBRIPLATE

MOLYKOTE

MOBIL

ANTI-SEIZE TECHNOLOGY

CRC

JET-LUBE

KRYTOX

LOCTITE

LPS DETEX

PETROCHEM

SPRAYON

SUPER LUBE

TRI-FLOW

ZEP

No Direct Contact (NSF H2) Food-Grade Grease

CRC

JET-LUBE

LUBRIPLATE

PETROCHEM

SPRAYON

WD-40 SPECIALIST

Direct Contact (NSF H3) Food-Grade Grease

LPS DETEX

LUBRIPLATE