Recessed-Mount Vandal-Resistant LED Light Fixtures

Available8 products
Recessed-mount vandal-resistant lights fit within a wall or ceiling to conceal their wiring and most of their housing. When properly installed, they leave no gaps to hide contraband or pry off the fixture. Vandal-resistant light fixtures resist impacts and tampering and illuminate schools, public restrooms, transit centers, and other high-abuse areas. They have a sturdy housing and a thick lens that withstands repeated blows without shattering. Confinement lights combine vandal resistance with features such as ligature resistance or dual lenses that help prevent people from using the fixtures to hurt themselves or others in correctional facilities, detention centers, behavioral health centers, and holding areas. These LED lights use less energy and typically last longer than other lighting technologies.

Supermax Confinement Fixtures

Supermax Confinement Fixtures
Dual lenses on Supermax lights provide two layers of impact resistance. The inner lens uniformly distributes light and the outer lens forms a shatter-resistant barrier. These confinement fixtures have a heavy-gauge steel housing with a one-piece door frame. Smooth edges and welds on the housing and frame prevent cuts and leave no exposed seams to use as ligature points for tying off cords or fabric strips. Built-in LED arrays eliminate the need to replace bulbs and typically last for years before requiring a replacement driver. These troffers install in drop ceiling grids or concrete ceiling cutouts and illuminate behavioral health centers, correctional facilities, schools, and other high-abuse settings.
Loading...

MediMode Behavioral Confinement Fixtures

MediMode Behavioral Confinement Fixtures
MediMode Behavioral fixtures have an impact-resistant lens, heavy-gauge steel housing with a one-piece door frame, and tamper-resistant fasteners that require specialized tools to install and remove. Retaining brackets along the edge of the frame secure the lens to keep it from being dislodged. Smooth edges and welds on the housing and frame prevent cuts and leave no exposed seams to use as ligature points for tying off cords or fabric strips. Built-in LED arrays eliminate the need to replace bulbs and typically last for years before requiring a replacement driver. These troffers install in drop ceiling grids and are commonly used to illuminate behavioral health centers and schools.
Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top