Hazardous Location Fixture Retrofit Kits
Available2 products
Hazardous locations retrofit kits convert existing hazloc fixtures to LED to reduce operating costs and improve light quality. They fit hazloc fixtures of specific brands and series to upgrade them and maintain their original class, division, and group ratings. The kits include components that attach to the base of an existing fixture so it doesn't have to be completely removed, replaced, and rewired. Hazardous location lighting fixtures illuminate areas with flammable, combustible, or ignitable materials. They keep arcs and sparks contained so that the fixtures won't cause a fire or explosion. They carry class and division ratings as defined by NEC and OSHA for use in locations where specific hazards are present in normal or abnormal conditions. Class I and II fixtures also carry group ratings designating use in locations with specific types of gas, vapor, or dust.
Hazardous Location Fixture Retrofit Kits
These retrofit kits convert Appleton V-51 and Killark V round (jelly jar) hazloc fixtures from incandescent to LED. They allow the base of existing fixture to remain in place and replace the globe and bulb with an LED luminaire. Their built-in LED arrays eliminate the need to replace bulbs and typically last for years before requiring a replacement driver. They illuminate Class I and II, Division 2 hazardous locations where flammable gases or vapors and/or combustible dusts are normally confined or not present in ignitable concentrations. Their group ratings designate use in locations with specific types of gas, vapor, or dust. They prevent arcs or sparks within the fixture from igniting gases, vapors, or dusts on or near the fixture.
| Loading... | ||||||