Indoor Wireways
Available173 products
Indoor wireways route and protect wire and cable in enclosed spaces. They are commonly installed in spaces such as electrical rooms where service entrance equipment is present. These wireways also direct wire and cable around electrical machinery. They prevent damage from exposure to small amounts of falling dirt, but they are not suitable for areas with exposure to large amounts of dust, dirt, and water. Wireways install as systems, with straight sections, fittings, and accessories connecting to form a pathway. Individual components in wireway systems must be purchased from the same brand to ensure compatibility.
Indoor Wireways Without Knockouts
These indoor wireways don't have knockouts, so they're ideal for custom configurations. Users can determine where to place knockouts to best suit their applications. These wireways route and protect wire and cable in indoor areas, such as electrical rooms or where a large amount of wiring needs to be routed to electrical panels, electrical equipment, or machines. They can connect with multiple wireway sections for long, simple runs, or fittings can be attached for modifications.
Hinged Cover
HOFFMAN Wireways
| Loading... | ||||||||||||||||
WIEGMANN Wireways
| Loading... | ||||||||||||||||
Screw-On Cover
HOFFMAN Wireways
| Loading... | ||||||||||||||||
Indoor Wireways with Knockouts
These indoor wireways include knockouts, so users don't have to cut their own. They're ideal for standard configurations that don't require a custom setup. These wireways route and protect wire and cable in indoor areas such as electrical rooms, or where a large amount of wiring needs to be routed to electrical panels, electrical equipment, or machines. They can connect with multiple wireway sections for long, simple runs, or fittings can be attached for modifications.
Hinged Cover
WIEGMANN Wireways
| Loading... | ||||||||||||||||
90 Degree Elbows for Indoor Wireways
These elbows have two openings on a 90° angle to route indoor wireways that turn sharply, such as around corners.
For HOFFMAN Wireways
| Loading... | |||||||||
For WIEGMANN Wireways
| Loading... | |||||||||
90 Degree Sweep Elbows for Indoor Wireways
These sweeping elbows have two openings on a 90° angle with a straight section in between each opening, allowing them to route indoor wireways and navigate large radius turns. They're ideal for guiding wire and cable around equipment and machines.
For HOFFMAN Wireways
| Loading... | |||||||||
For WIEGMANN Wireways
| Loading... | |||||||||
45 Degree Elbows for Indoor Wireways
These elbows have two openings on a 45° angle to route indoor wireways that turn sharply. They're ideal for routing wire and cable in narrow spaces.
For HOFFMAN Wireways
| Loading... | |||||||||
For WIEGMANN Wireways
| Loading... | |||||||||
Tees for Indoor Wireways
Tees have three openings on 90° angles to route indoor wireways in two directions. Tees may also transition to different size wireways to accommodate larger or smaller wire or cable runs, and route them in different directions, They're ideal for routing wire and cable in different directions, such as running power cable to panels across the facility.
For HOFFMAN Wireways
Flush Tee
| Loading... | |||||||||
Sweep Tee
| Loading... | |||||||||
Tee Cross
| Loading... | |||||||||
For WIEGMANN Wireways
Flush Tee
| Loading... | |||||||||
Reducers for Indoor Wireways
Reducers have two different-sized openings to adapt larger straight sections of indoor wireways to smaller sections, accommodating differences in wire or cable sizes. They transition large runs of cable near the service entrance to smaller runs as the wireway gets closer to a machine or equipment.
| Loading... | ||||||||
End Caps for Indoor Wireways
End caps protect wire and cable by sealing off open ends of indoor wireways. End caps also provide a finished appearance or be used as a temporary seal before the wireway system is expanded. They're commonly used in complex runs or at the end of deadheaded straight runs.
2-1/2 in W x 2-1/2 in H
| Loading... | ||||||
4 in W x 4 in H
| Loading... | ||||||
6 in W x 6 in H
| Loading... | ||||||
8 in W x 8 in H
| Loading... | ||||||
10 in W x 10 in H
| Loading... | ||||||
12 in W x 12 in H
| Loading... | ||||||
Telescoping Fittings for Indoor Wireways
Telescoping fittings have an adjustable length to route indoor wireways that may change size. They're often used when the exact length isn't determined before installation or when a custom length is needed. These fittings may also bridge gaps in a wireway system after the installation is completed or allow wireways to be joined without removing many preinstalled fittings.
| Loading... | ||||||||
Connectors for Indoor Wireways
Connectors join together wireways and fittings and provide support so the system won't sag or break. They're installed at joints and transitions, such as where straight sections join elbows, tees, and reducers.
For HOFFMAN Wireways
| Loading... | |||||
For WIEGMANN Wireways
| Loading... | |||||
Box Connectors for Indoor Wireways
Box connectors join indoor wireways to electrical enclosures and ensure a tight seal.
For HOFFMAN Wireways
| Loading... | |||||
For WIEGMANN Wireways
| Loading... | |||||
Hanger Support for Indoor Wireways
Hanger supports screw onto surfaces and wireway sections to prevent indoor wireways from sagging. Longer wireways require more supports than shorter ones, and they're also required for wireways that run along surfaces that aren't solid.
For WIEGMANN Wireways
| Loading... | ||||