Dust-Tight Wireways
Available10 products
Dust-tight wireways route and protect wire and cable in spaces that are exposed to dust. They have permanently secured gaskets that prevent dust from reaching the wire or cable. These wireways are commonly installed in indoor industrial, manufacturing, and machining applications. Wireways install as systems, with straight sections, fittings, and accessories connecting to form a pathway. Individual components in wireway systems must be purchased from the same brand to ensure compatibility.
Wireway Height
Lay-In Dust-Tight Wireways without Knockouts
These wireways simplify installations of large cable or many wires or cables. They're also ideal for installations that will have future wiring changes. They have an open top that allows users to lay in wire and cable instead of pulling it through. These wireways do not have knockouts, so users can determine where to place knockouts to best suit their applications. They're also dust-tight and commonly used in areas exposed to dust, like industrial, machining, and manufacturing applications. They can connect with multiple wireway sections for long, simple runs, or fittings can be attached for modifications.
Hinged Cover with Quick-Release Latches
Loading... |
90 Degree Elbows for Dust-Tight Wireways
These elbows have two openings on a 90° angle to route dust-tight wireways that turn sharply, such as around corners.
Wireway 90 Degree Elbow
Non-Removable Cover
Loading... |
Hinged Cover with Quick-Release Latches
Loading... |
Clockwise Transposition Wireway 90 Degree Elbow
Hinged Cover with Quick-Release Latches
Loading... |
Counterclockwise Transposition Wireway 90 Degree Elbow
Hinged Cover with Quick-Release Latches
Loading... |
End Caps for Dust-Tight Wireways
End caps protect wire and cable by sealing off open ends of dust-tight wireways. End caps also provide a finished appearance and can be used as a temporary seal before the wireway system is expanded. They're commonly used in complex runs or at the end of deadheaded straight runs.
Loading... |
Barriers for Dust-Tight Wireways
Barriers divide dust-tight wireways into multiple compartments to keep wire and cable separate, or route them in different directions. They're ideal for routing incoming and outgoing wiring in the same wireway section, routing wiring that needs to run to different machines or components, and assisting in wire identification and future wiring changes.
Wireway Barrier
Loading... |
Wireway Barrier Bracket
Loading... |
Wireway Barrier Kit
Loading... |
Gaskets & Sealing Plates for Dust-Tight Wireways
Gaskets and sealing plates join sections of dust-tight wireways and provide a seal to keep out dust that may harm wire and cable. They're required in dust-tight wireway installations.
90-Degree Angle Wireway Sealing Plates
Loading... |
Quick-Release Flat Wireway Sealing Plates
Loading... |
Wireway Gasket and Screws
Loading... |