Metallic Single-Channel Surface Raceways

Available69 products
These single-channel surface raceways have a durable metallic construction. They protect wire and cable from impact damage and can install in indoor areas with high traffic. They mount on walls and ceilings and route wire and cable throughout an area. Wire and cable are laid into the raceways, which keep the conductors from being exposed and prevent kinks. They have a single channel, so they're ideal for simple installations where wire and cable don't need to be separated. These raceways are commonly installed in spaces such as educational facilities, labs, hospitals, and manufacturing facilities and are used with electrical wiring and communication, power, and A/V cable. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.

Straight-Section Single-Channel Raceways

Straight-Section Single-Channel Raceways

Straight-section raceways route and protect wire and cable in a straight line. They have a durable metallic construction and a single-channel design. These raceway sections can connect with multiple straight sections for long, simple runs, or fittings can be attached for modifications.

For 500 Series

Loading...

For 700 Series

Loading...

For 2400 Series

Loading...

For 3000 Series

Loading...

For 4000 Series

Loading...

Cover for Single-Channel Raceways

Cover for Single-Channel Raceways

Covers are placed over open straight-section, single-channel raceways to protect the wire and cable inside. They keep out dust, dirt, and other debris, and they prevent personnel from accidentally touching the wire and cable. The brand and series of the cover must match the brand and series of the raceway. Covers are only required for straight-section raceways that do not include a built-in or separate cover.

For 2400 Series

Loading...

For 3000 Series

Loading...

90 Degree Elbows for Single-Channel Raceways

90 Degree Elbows for Single-Channel Raceways
These elbows have two openings on a 90° angle to route single-channel raceways that turn sharply, such as around corners.

For 500 Series

Loading...

For 700 Series

Loading...

For 2400 Series

Loading...

For 3000 Series

Loading...

For 4000 Series

Loading...

Tees for Single-Channel Raceways

Tees for Single-Channel Raceways
Tees have three openings on 90° angles to route single-channel raceways in two directions. They're ideal for branching out wire and cable to independent raceway systems.

For 500 Series

Loading...

For 700 Series

Loading...

For 3000 Series

Loading...

For 4000 Series

Loading...

End Fittings for Single-Channel Raceways

End Fittings for Single-Channel Raceways
End fittings install in a cutout in the wall to bring wire and cable through to single-channel surface raceways. They may also be used as a temporary seal before the raceway system is expanded.

For 2400 Series

Loading...

For 3000 Series

Loading...

For 4000 Series

Loading...

Cover Clips for Single-Channel Raceways

Cover Clips for Single-Channel Raceways
Cover clips are placed over the seam where two straight-section single-channel raceways come together. They provide a finished, neat appearance and cover jagged edges that could cause injury or damage conduit.

For 2400 Series

Loading...

For 3000 Series

Loading...

For 500 Series

Loading...

For 700 Series

Loading...

Outlet Boxes for Single-Channel Raceways

Outlet Boxes for Single-Channel Raceways
Outlet boxes house wiring devices like switches and receptacles. They're placed along the single-channel raceway system to provide convenient access to power, such as near desks in an office.

For 2400 Series

Loading...

For 500 Series

Loading...

For 700 Series

Loading...

Outlet Box Plates for Single-Channel Raceways

Outlet Box Plates for Single-Channel Raceways
Outlet box plates cover outlet boxes in a single-channel raceway system, providing a finished, neat appearance and preventing personnel from accidentally touching exposed wire.

For 3000 Series

Loading...

For 4000 Series

Loading...

Mounting Brackets for Single Channel Raceway

Mounting Brackets for Single Channel Raceway
These brackets mount sections of single-channel raceways to surfaces. They provide support for sections of raceway and prevent sagging. They may also join lengths of straight sections together to expand the raceway system.

For 2400 Series

Loading...

For 3000 Series

Loading...

For 4000 Series

Loading...

For 500 Series

Loading...

For 700 Series

Loading...

Wire Clips for Single Channel Raceway

Wire Clips for Single Channel Raceway

Wire clips are placed over conductors inside single-channel raceways to hold them in place. They prevent tangling and kinking, and they help keep wire and cable organized and routed smoothly so there are no performance issues. These clips are often used on long stretches of wiring where tangling is a concern.

For 2400 Series

Loading...

For 3000 Series

Loading...

For 4000 Series

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top