Multichannel Surface Raceways

Available29 products
Multichannel surface raceways have multiple divisions for routing wire and cable. These raceways are used when different types of wire or cable need to be routed separately. Surface raceways mount on walls and ceilings to bring wire and cable into a space. Wire and cable are laid into or pulled through the raceways after installation, keeping the conductors from being exposed and preventing kinks. These raceways commonly house communication and power cable, and they're often installed in classrooms, offices, and hotels. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.

Straight-Section Multichannel Raceways

Straight-Section Multichannel Raceways
These straight-section raceways make up the foundation of a raceway system. They route and protect wire and cable in a straight line and have a multichannel design to route different types of wire within a single raceway. These raceway sections can connect with multiple straight sections for long, simple runs, or fittings can be attached for modifications.

2 - Channel, 2400D Series

Loading...

3 - Channel, BaseTrak PB3 Series

Loading...

2 - Channel, CableSmart 40N2 Series

Loading...

Covers for Straight-Section Multichannel Raceways

Covers for Straight-Section Multichannel Raceways
Covers are placed over open straight-section, multichannel raceways to protect the wire and cable inside. They keep out dust, dirt, and other debris, and they prevent personnel from accidentally touching the wire and cable. The brand and series of the cover must match the brand and series of the raceway. Covers are only required for straight-section raceways that do not include a built-in or separate cover.

For CableSmart 40N2 Series

Loading...

90 Degree Elbows for Multichannel Raceways

90 Degree Elbows for Multichannel Raceways

These elbows have two openings on a 90° angle to route multichannel raceways that turn sharply, such as around corners.

For BaseTrak PB3 Series

Loading...

For CableSmart 40N2 Series

Loading...

For 2400D Series

Loading...

Tees for Multichannel Raceways

Tees for Multichannel Raceways
Tees have three openings on 90° angles to route multichannel raceways in two directions. They're ideal for branching out wire and cable to independent raceway systems or to a device.

For BaseTrak PB3 Series

Loading...

For CableSmart 40N2 Series

Loading...

Cover Clips for Multichannel Raceways

Cover Clips for Multichannel Raceways
Cover clips are placed over the seam where two straight-section multichannel raceways come together. They provide a finished, neat appearance and cover jagged edges that could cause injury or damage conduit.

For CableSmart 40N2 Series

Loading...

End Fittings for Multichannel Raceways

End Fittings for Multichannel Raceways
End fittings install in a wall cutout to bring wire and cable through to multichannel raceways. They may also be used as a temporary seal before the raceway system is expanded.

For CableSmart 40N2 Series

Loading...

For 2400D Series

Loading...

Outlet Boxes for Multichannel Raceways

Outlet Boxes for Multichannel Raceways

Outlet boxes house wiring devices like switches and receptacles. They're placed along a multichannel raceway system to provide convenient access to power, such as near desks in an office.

For 2400D Series

Loading...

For BaseTrak PB3 Series

Loading...

For CableSmart 40N2 Series

Loading...

Outlet Box Plates for Multichannel Raceways

Outlet Box Plates for Multichannel Raceways

Outlet box plates cover outlet boxes in a multichannel raceway system, providing a finished, neat appearance and preventing personnel from accidentally touching exposed wire.

For CableSmart 40N2 Series

Loading...

Wire Clips for Multichannel Raceways

Wire Clips for Multichannel Raceways
Wire clips are placed over conductors inside multichannel raceways to hold them in place. These clips are often used on long stretches of wiring where tangling and kinking is a concern. They keep wire and cable organized and routed smoothly so there are no performance issues.

For BaseTrak PB3 Series

Loading...

For CableSmart 40N2 Series

Loading...

Base Couplings for Multichannel Raceways

Base Couplings for Multichannel Raceways
These base couplings work in conjunction with cover clips to join two sections of multichannel raceways, giving them a neat appearance.

For 2400D Series

Loading...

For CableSmart 40N2 Series

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top