Low-Profile Over Floor Raceways

Available20 products
These raceways install over the floor to route wire and cable throughout open spaces. They have a low profile that prevents tripping while keeping wire and cable discreetly concealed. These raceways don't require cutting into the floor or carpeting. Wire and cable are laid into the raceways after installation, keeping the conductors from being exposed and preventing kinks. These raceways commonly house communication and A/V cable, and they're often installed in open areas like office conference rooms and lecture halls. Individual components in raceway systems must be purchased from the same brand and series to ensure compatibility.

Straight-Section Over Floor Raceways

Straight-Section Over Floor Raceways

These straight-section raceways protect wire and cable in a straight line and install over the floor. Their low profile routes wire and cable throughout open spaces and prevents tripping. These raceway sections can connect with multiple straight sections for long, simple runs, or fittings can be attached for modifications.

1 - Channel, 1500 Series

Loading...

1 - Channel, 2600 Series

Loading...

4 - Channel, OFR Series

Loading...

90 Degree Elbows for Low-Profile Over Floor Raceways

90 Degree Elbows for Low-Profile Over Floor Raceways
These elbows have two openings on a 90° angle to route low-profile over-floor raceways that turn sharply, such as around corners.

For 1500 Raceways

Loading...

For 2600 Raceways

Loading...

For OFR Raceways

Loading...

End Fittings for Over Floor Raceways

End Fittings for Over Floor Raceways
End fittings install in a wall cutout to bring wire and cable through to over-floor raceways. They may also be used as a temporary seal before the raceway system is expanded.

For 1500 Raceways

Loading...

For OFR Raceways

Loading...

Transition Fittings for Over Floor Raceways

Transition Fittings for Over Floor Raceways
Transition fittings adapt over-floor raceways to join a wall raceway system, allowing for a customized raceway installation.
Loading...

Outlet Boxes for Over Floor Raceways

Outlet Boxes for Over Floor Raceways
Outlet boxes house wiring devices like switches and receptacles. They're placed along an over-floor raceway system to provide convenient access to power, such as near desks in an office or seats in a lecture hall. These outlet boxes accommodate multiple types of wire and cable, including power, communication, and A/V cable.

For 1500 Raceways

Loading...

For 2600 Raceways

Loading...

For OFR Raceways

Loading...

Outlet Box Plates for Over Floor Raceways

Outlet Box Plates for Over Floor Raceways
Outlet box plates cover outlet boxes in an over-floor raceway system, providing a finished, neat appearance and preventing personnel from accidentally touching exposed wire.

For OFR Raceways

Loading...

Wire and Grounding Clips for Over Floor Raceways

Wire and Grounding Clips for Over Floor Raceways
Wire and grounding clips are placed over conductors inside low-profile, over-floor raceways to hold them in place. They prevent tangling and kinking, and they help keep wire and cable organized and routed smoothly so there are no performance issues. These clips are often used on long stretches of wiring where tangling is a concern.

For 1500 Overfloor Raceways

Loading...

For OFR Raceways

Loading...

For OFR Series Raceways

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top