Retroreflective Photoelectric Proximity Sensors
Available74 products
Retroreflective photoelectric proximity sensors detect the presence of objects by shining a light on a reflector, sensing the reflected light, and triggering when objects are present or missing. They consist of a transmitter and receiver in one housing, positioned directly across from a retroreflector. These sensors are faster to set up than other sensor types and are powered only on one side. They are commonly used in applications such as bottle-filling control, jam detection, and item counting on a conveyor.
Rectangular Sensors with Non-Terminated Cables
Rectangular sensors with non-terminated cables end in bare wire, allowing them to be cut to length and terminated with different connectors. Due to their flat sides, they are sturdier than cylindrical sensors, making them suitable for applications where vibration is present.
Polarized Retroreflective
Right Angle Orientation
| Loading... | ||||||
Retroreflective
Right Angle Orientation
| Loading... | ||||||
Straight Orientation
| Loading... | ||||||
Rectangular Sensors with Pigtail Connectors
Rectangular sensors with pigtail connectors feature factory-attached, pre-terminated cables that require no additional cable assembly. These sensors save installation time and minimize connection issues in plug-and-play applications. Due to their flat sides, they are sturdier than cylindrical sensors, making them suitable for applications where vibration is present.
Polarized Retroreflective
Right Angle Orientation
| Loading... | |||||
Retroreflective
Right Angle Orientation
| Loading... | |||||
Rectangular Sensors with Built-in Connectors
Rectangular sensors with built-in connectors feature factory-attached connectors for quick installation and replacement. Due to their flat sides, they are sturdier than cylindrical sensors, making them suitable for applications where vibration is present.
Polarized Retroreflective
Right Angle Orientation
| Loading... | |||||||
Retroreflective
Right Angle Orientation
| Loading... | |||||||
Rectangular Sensors with Terminal Blocks
Rectangular sensors with terminal blocks accept various direct wiring and eliminate the requirement for compatible connectors. Wires of various sizes can be installed and removed without specialized tools, simplifying installation and troubleshooting. Due to their flat sides, they are sturdier than cylindrical sensors, making them suitable for applications where vibration is present.
Retroreflective
Right Angle Orientation
| Loading... | ||||
Cylindrical Sensors with Non-Terminated Cables
These cylindrical sensors have non-terminated cables that can be cut to a custom length and paired with a variety of connector types. Cylindrical sensors fit into compact spaces more easily than rectangular sensors.
Polarized Retroreflective
Right Angle Orientation
| Loading... | ||||||
Straight Orientation
| Loading... | ||||||
Retroreflective
Right Angle Orientation
| Loading... | ||||||
Straight Orientation
| Loading... | ||||||
Cylindrical Sensors with Built-in Connectors
These cylindrical sensors have built-in connectors that allow quick installation and easier replacement compared to sensors with bare cables. Cylindrical sensors fit into compact spaces more easily than rectangular sensors.
Polarized Retroreflective
Right Angle Orientation
| Loading... | |||||||
Straight Orientation
| Loading... | |||||||
Retroreflective
Right Angle Orientation
| Loading... | |||||||
Straight Orientation
| Loading... | |||||||