In-Line Fuse Holders

Available44 products
In-line fuse holders are wire-mounted holders that connect anywhere along a circuit to protect specific lines. They allow these lines to be isolated in the event of a fault so that the rest of the wiring system won't be affected. They have a receptacle that encloses a fuse and pigtail wires or terminals that extend from each end of the receptacle for connecting to a circuit. These fuse holders are commonly used on automotive wiring and other applications where space is limited or fuse box would be impractical.

In-Line Fuse Holders for Class CC & Midget Fuses

In-Line Fuse Holders for Class CC & Midget Fuses
These in-line fuse holders are compatible with 13/32" x 1 -1/2" UL class CC and midget fuses rated up to 30A. They withstand humid, corrosive environments and are commonly used for overcurrent protection in street lights, parking lot lights, traffic signals, boats, and other outdoor equipment. Breakaway fuse holders comply with state and federal highway commission standards for line-side disconnects during pole knockdowns and include insulating boots that make the fuse holders IP67 rated as dust-tight and submersible in 1m depth of water.

Compatible Fuse Series: Unspecified

Loading...

Compatible Fuse Series: AGU, ATM, ATQ, BAF, BLF, BLN, FLM, FLQ, FNM, FNQ, GGU, HC10S, KLK, KLKD, KLM, KTK, OTM, TRM

Loading...

Compatible Fuse Series: BAF, FNM, FNQ, KLM, KTK

Loading...

In-Line Fuse Holders for Automotive Blade Fuses

In-Line Fuse Holders for Automotive Blade Fuses
These in-line fuse holders are compatible with automotive blade fuses commonly used for overcurrent protection of vehicle wiring and electrical systems. The blade-style contacts of automotive blade fuses plug into these holders for a secure connection. They're typically used to hold fuses in cars, trucks, RVs, and DC-powered equipment.

Compatible Fuse Series: 257, AF, ATC

Loading...

Compatible Fuse Series: 297, AF2, ATM

Loading...

Compatible Fuse Series: 299, AF3, MAX

Loading...

In-Line Fuse Holders for Glass & Ceramic Fuses

In-Line Fuse Holders for Glass & Ceramic Fuses
These in-line fuse holders are compatible with 1/4" dia. glass and ceramic fuses for overcurrent protection in electronics equipment, appliances, and lighting circuits. They're used with glass fuses for protecting low-current circuits or ceramic fuses for protecting high-current circuits.

Compatible Fuse Series: Unspecified

Loading...

Compatible Fuse Series: 311, 312, 313, 314, 315, 322, 326, 3AG, ABC, ACG, GAB, GBB, GDL, GDV, GGC, GSA, MDA, MDL, MDQ, MDV, MDX, MMB

Loading...

Compatible Fuse Series: SFE-20

Loading...

Fuse Taps for Automotive Blade Fuses

Fuse Taps for Automotive Blade Fuses
Fuse taps for automotive blade fuses allow two fuses to be connected to one fuse slot, so there's no need to modify wiring to add a second fuse to a circuit. They have a two-blade connector that plugs into a fuse slot and a dual-slot body that accepts automotive blade fuses. They're commonly used to provide additional overcurrent protection on vehicle circuits for accessory lighting, snowplows, and salt spreaders.

Compatible Fuse Series: 257, AF, ATC

Loading...

Compatible Fuse Series: 297, AF2, ATM

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top