Fork Terminals

Available265 products
Fork terminals slide around and secure to screws or threaded connection posts to create semipermanent connections between wires and circuit points. Also known as spade lug terminals, they attach power or ground wires to post-type terminals in moderate-vibration applications such as speakers, circuit boards, and busbars. They have a barrel-shaped body, where stripped conductors insert and are either crimped or soldered to hold them, and a flat, prong-shaped terminal that connects to termination posts without removing the screw or nut altogether.

Insulated Fork Terminals

Insulated Fork Terminals
These fork terminals have insulation around their barrel that helps prevent wire strands from falling out, deter accidental touch, and protect the connection from short circuits, deterioration, and corrosion damage.

Crimp Termination & Heat Shrink

For #6 Stud Size

Loading...

For #10 Stud Size

Loading...

For 1/4 in Stud Size

Loading...

Crimp Termination Only

For #4 Stud Size

Loading...

For #6 Stud Size

Loading...

For #8 Stud Size

Loading...
Loading...

For #10 Stud Size

Loading...
Loading...

For 1/4 in Stud Size

Loading...

Non-Insulated Fork Terminals

Non-Insulated Fork Terminals
These fork terminals have no insulation and provide an unobstructed view of their barrel for more precise crimping and to allow inspection of the wire contact and tensile strength. Non-insulated fork terminals are suitable for higher voltage applications but should never be used in corrosive environments or anywhere the connection might get inadvertently touched.

For #6 Stud Size

Loading...

For #8 Stud Size

Loading...

For #10 Stud Size

Loading...

For 1/4 in Stud Size

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top