Beam Clamps for Strut Channel

Available9 products

These clamps mount strut channel to beams, allowing it to be suspended at a right angle to the beam. They're ideal for channel that must be installed directly on the beam. They position in or over the channel and clamp onto one or both edges of the beam. They're tightened down for a secure grip.

Channel Beam U-Bolt Clamps

Channel Beam U-Bolt Clamps
Channel beam U-bolt clamps can be used to secure channel to either the underside of the beam or the inside of the beam, depending on the configuration of the clamp. They're designed with a piece of bent plate and a U-bolt that's threaded on both sides to secure strut channel in place. The channel is fed through the U-bolt, which is then tightened to secure both the plate to the beam and the channel to the plate.

For 1-1/2 in Strut Channels

Loading...

For 1-5/8 in Strut Channels

Loading...

Channel Beam Thru Clamps

Channel Beam Thru Clamps
Channel beam thru clamps secure strut channel to beams using a “window” cut out of a bent plate and a set screw. A pair of these clamps are placed on both sides of a beam and a channel is fed through the windows. Once in place, clamp is secured to the beam with a set screw, which also holds the channel in place.

For 1-5/8 in Strut Channels

Loading...

Flange Beam Clamps

Flange Beam Clamps
Flange beam clamps support strut channel from both sides of a beam. They position inside the channel and secure it to the beam with set screws.

For 1-5/8 in Strut Channels

Loading...

Channel Beam C-Clamps

Channel Beam C-Clamps
Channel beam C-clamps secure channel to beams by clamping down on the flanges of a beam with a set screw. The channel is sandwiched between the flange and the clamp.

Iron

Loading...

Steel

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top