Elbows for Heavy-Wall RMC & Medium-Wall IMC Metal Conduit
Available69 products
Elbows join two lengths of threaded heavy-wall RMC or medium-wall IMC metal conduit at an angle to change the direction of a conduit run.
90° Elbows
These elbows screw onto the ends of two pieces of threaded RMC or IMC conduit to join them at a 90° angle and change the direction of the run.
304 Stainless Steel
Loading... |
316 Stainless Steel
Loading... |
Aluminum
Loading... |
45° Elbows
These elbows screw onto the ends of two pieces of threaded RMC or IMC conduit to join them at a 45° angle and change the direction of the run.
304 Stainless Steel
Loading... |
316 Stainless Steel
Loading... |
Aluminum
Loading... |
22.5° Elbows
These elbows screw onto the ends of two pieces of threaded RMC or IMC conduit to join them at a 22.5° angle and change the direction of the run.
Loading... |
Pull Elbows
Pull elbows have a removable cover that allows users to pull wire and cable or perform maintenance. They screw onto the ends of two pieces of threaded RMC or IMC conduit to join them at a 90° angle and change the direction of the run.
Zinc
Loading... |
Iron
Loading... |
316 Stainless Steel
Loading... |
Short Elbows
Short elbows are smaller than standard elbows and are ideal for tight locations. They screw onto the ends of two pieces of threaded RMC or IMC conduit to join them at a 90° angle and change the direction of the run.
Iron
Loading... |