Hangers for Conduit & Pipe

Available78 products

These hangers are typically used in conjunction with beam, wire rod, and purlin clamps and clips. They support conduit and pipe installations that hang from ceilings or beams by threaded rods or wire. Some hangers mount directly on a surface to support runs along walls or equipment.

Screw-On Conduit & Cable Hangers

Screw-On Conduit & Cable Hangers

These hangers clamp onto conduit and cable, using threaded holes to secure the screw. This method encloses the cable or conduit without the need for a nut. The screw is integrated into the hanger, so it can't be dropped or lost. These hangers suspend from a threaded rod and support conduit and cable runs along beams and ceilings. They can be used with both rigid and thin-wall metal (EMT) conduit.

Polished Stainless Steel

Loading...

Zinc Plated Steel

Loading...

Galvanized Steel

Loading...

PVC Coated Steel

Loading...

Snap Close Conduit & Cable Hangers

Snap Close Conduit & Cable Hangers
These conduit and cable hangers snap closed for a quick installation that doesn't require tools. They can mount directly onto surfaces like ceilings and walls, or they can connect to beam clamps with a threaded rod for suspended installations. These hangers provide horizontal or vertical support of conduit and cable.
Loading...

Conduit U-Bolts

Conduit U-Bolts
U-bolts are stronger than other routing clamps and hangers to support heavy conduit as well as pipe and tubing from ceilings, walls, and poles. They can mount into an existing bracket or be combined with a mounting plate for a secure hold at the mounting surface.
Loading...

Split-Ring Conduit Hanger Clamps

Split-Ring Conduit Hanger Clamps
These hanger clamps have a split-ring design that fits snugly around conduit. The conduit loads between the two halves of the ring, and the side bolts adjust for a tight fit. These clamps suspend from threaded rods or mount onto walls and devices with an extension rod and mounting plate to support conduit runs.
Loading...

Split-Ring Extension Rods and Mounting Plates

Split-Ring Extension Rods and Mounting Plates
These extension rods and mounting plates are used with split-ring conduit hanger clamps to suspend them from threaded rods or for mounting onto walls and devices.
Loading...

Conduit & Cable Attachment Brackets

Conduit & Cable Attachment Brackets
These attachment brackets mount conduit and cable to metal studs and wood beams with a snap, so no tools are required. The spring steel clips on either end to grip the mounting surface and conduit or cable tightly. These brackets can support two runs or be snapped in half to secure a single run. They also have pre-punched holes, so they can be screwed into wood studs or concrete if desired. Stabilizer legs help provide support without wobbling.

Cable Bracket

Loading...

Cable Support Bracket

Loading...

Cable Flange Clip

Loading...

Magnetic-Mount Bridle Rings & Saddle Rings

Magnetic-Mount Bridle Rings & Saddle Rings
Magnetic-mount bridle and saddle rings support communication cables and other non-sensitive cables and wires on steel beams, ceiling decks, metal joists, and frame rails. They consist of loops permanently secured to magnets, mount to magnetic metal surfaces, and can be repositioned or reused as needed.
Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top