These conduit and cable hangers snap closed for a quick installation that doesn't require tools. They can mount directly onto surfaces like ceilings and walls, or they can connect to beam clamps with a threaded rod for suspended installations. These hangers provide horizontal or vertical support of conduit and cable.

U-bolts are stronger than other routing clamps and hangers to support heavy conduit as well as pipe and tubing from ceilings, walls, and poles. They can mount into an existing bracket or be combined with a mounting plate for a secure hold at the mounting surface.

These hanger clamps have a split-ring design that fits snugly around conduit. The conduit loads between the two halves of the ring, and the side bolts adjust for a tight fit. These clamps suspend from threaded rods or mount onto walls and devices with an extension rod and mounting plate to support conduit runs.

These extension rods and mounting plates are used with split-ring conduit hanger clamps to suspend them from threaded rods or for mounting onto walls and devices.

These attachment brackets mount conduit and cable to metal studs and wood beams with a snap, so no tools are required. The spring steel clips on either end to grip the mounting surface and conduit or cable tightly. These brackets can support two runs or be snapped in half to secure a single run. They also have pre-punched holes, so they can be screwed into wood studs or concrete if desired. Stabilizer legs help provide support without wobbling.

Magnetic-mount bridle and saddle rings support communication cables and other non-sensitive cables and wires on steel beams, ceiling decks, metal joists, and frame rails. They consist of loops permanently secured to magnets, mount to magnetic metal surfaces, and can be repositioned or reused as needed.