These plungers work with air-powered, cordless, or manual adhesive applicators. They replace worn plungers or provide additional mixing ratio options and should be matched with the compatible applicator model number.

Push disks attach to the applicator plunger and provide more surface area to push the adhesive through the cartridges in two-part applicators. They come in different sizes to accommodate different mixing ratios and should be matched with the compatible applicator model number.

These pull knobs replace worn pull knobs on the plunger mechanism in adhesive applicators. Pull knobs draw the plunger back in order to load or extract adhesive cartridges from the applicator.

These clip-on plungers work with two-part adhesive applicators to change the mixing ratio of the adhesive. They should be matched with the compatible applicator model number.

Support straps clip on to the frame of an applicator to hold two-part cartridges securely in place. They should be matched with the compatible applicator model number.

A contouring sheet helps prevent adhesives from spreading and dripping when working with small or odd-shaped items. The adhesive can be applied to the sheet and then wrapped around the part to reduce air bubbles and open spaces from forming. The sheet removes easily once the adhesive cures.