Flap Discs
General Purpose Flap Discs for Stainless Steel & Soft Metals
Type 27 Disc
Type 27 is best suited for blending areas and smooth finishing. It is used primarily with the tool held at a 0° to 15° angle.
Loading... |
Type 29 Disc
Type 29 has angled flaps that provide greater surface contact for grinding and aggressive stock removal. They are typically used with the tool held at a 15° to 25° angle.
Loading... |
Radial Disc
Radial has flaps on the grinding side, rear side, and the radius for grinding fillet welds and hard-to-reach areas.
Loading... |
High-Performance Flap Discs for All Metals
Type 27 Disc
Type 27 is best suited for blending areas and smooth finishing. It is used primarily with the tool held at a 0° to 15° angle.
Loading... |
Type 29 Disc
Type 29 has angled flaps that provide greater surface contact for grinding and aggressive stock removal. They are typically used with the tool held at a 15° to 25° angle.
Loading... |
High-Performance Flap Discs for Carbon & Stainless Steel
Type 27 Disc
Type 27 is best suited for blending areas and smooth finishing. It is used primarily with the tool held at a 0° to 15° angle.
Loading... |
Type 29 Disc
Type 29 has angled flaps that provide greater surface contact for grinding and aggressive stock removal. They are typically used with the tool held at a 15° to 25° angle.
Loading... |
Radial Disc
Radial has flaps on the grinding side, rear side, and the radius for grinding fillet welds and hard-to-reach areas.
Loading... |
Cool-Cutting Flap Discs for Carbon & Stainless Steel
Type 27 Disc
Type 27 is best suited for blending areas and smooth finishing. It is used primarily with the tool held at a 0° to 15° angle.
Loading... |
Type 29 Disc
Type 29 has angled flaps that provide greater surface contact for grinding and aggressive stock removal. They are typically used with the tool held at a 15° to 25° angle.
Loading... |
Radial Disc
Radial has flaps on the grinding side, rear side, and the radius for grinding fillet welds and hard-to-reach areas.
Loading... |